ASSEMBLY
1.
Lower steering column
2.
Upper steering column
3.
Positioning bolt
4.
Star knobs
5.
Dead man’s handle
Steering column
1. Rotate the star knobs on the steering column to unlock them. Do not remove them.
2. Pull out the positioning bolt.
3. Fold the steering column into operating position.
N.B.:
Use the positioning bolt to adjust the steering column to a comfortable height for the operator. Ensure that the cable
cannot be trapped anywhere. Refer to
Steering columns in Maintenance and Adjustment.
4. Tighten the star knobs for the steering column to lock the upper steering column.
Engine crankcase oil
Fill the engine crankcase with sufficient oil of the correct viscosity (this will be full if you have recently purchased the
machine). Refer to the engine manual for specific information.
CHECKLIST
Run through the following checklist before proceeding.
•
Check that all assembly instructions have been complied with.
•
Check that no spares have been left in the box.
•
Check that all assembly instructions have been complied with.
•
Check that the steering column is secure and has been adjusted to a comfortable position.
