CLEANING THE MACHINE
Clean the machine thoroughly. Remove soil and dirt using a brush or cloth. Use paint or lubricant on bare metal surfaces. Do
not use abrasives, solvents or abrasive cleaning agents.
IMPORTANT:
NEVER clean the machine by spraying it with water and
do not store it outdoors. Store it in a dry, cool and secure location.
CHECK THE AIR FILTER
Refer to the engine manual for specific information on how to check and maintain the air filter.
CHECK THE SPARK PLUG
Refer to the engine manual for specific information on how to check, clean and replace the spark plug.
CHANGING ENGINE OIL
Replace the engine oil after the first two hours of operation, thereafter every 25 hours or every season, depending on which
occurs first. The oil must be changed whilst the engine is warm.
1. Disconnect the spark plug lead.
2. Clean the area around the oil cap.
3. Tilt the unit to the right.
4. Place an oil container under the oil cap.
5. Remove the oil cap and allow the oil to drain out. If necessary tilt the machine to drain all the oil out of the engine.
6. Put the machine back in an upright position.
7. Refill the engine with the oil recommended in the engine manual.
8. Replace and lock the oil cap.
9. Remove oil spills if necessary.
10.
Reconnect the spark plug lead.
CLEANING COOLING FINS
Remove any grass and dirt from the cooling fins every 25 hours to prevent damage as a result of overheating.
IMPORTANT: Remove sufficient fuel before tilting the machine to prevent spills. Use a
piece of plastic (e.g. from a bin bag) to seal the fuel tank when the machine is tilted.
Unscrew the cap on the fuel tank, cover the opening with plastic, replace the cap and lock
it securely before trying to put the machine on its side. Remember to remove the plastic
before using the machine again.
