Gregory TTMA-100, Assembly Manual

Page: 5 / 49

1
TTMA-100 DESIGN AND MAJOR COMPONENTS
GENERAL
A schematic of the TTMA-100 is shown in Figure 1. The major components of the TTMA-100,
as shown in Figure 1, are as follows:
Component Description
A Impact Head
B Bursting Mandrel
C First Energy Absorbing Tube
D Trailer Frame
E Axle Assembly
F Plastic Guide Plates
G End Caps
H Hitch Assembly
J Spacer
K Jack Assembly
Table 1 presents the general specifications for the Trailer TMA, including:
•
Overall dimensions, i.e., length, width and maximum height to the top of the impact head
and the top of the light bar
•
Weight of the trailer with no optional equipment and the tongue weight. Note the small
tongue weight of the trailer, which would not affect the load carrying capacity of the tow
vehicle.
•
The capacity and mounting height of the pintle hook.
•
Information on the axle assembly, i.e., load rating, wheel and tire sizes, and cold inflation
pressure.
Table 2 provides a list of parts with legends and part numbers. Please refer to these part numbers
and legends for ordering of spare parts. Note that this is not a complete parts list. Please inquire
about the complete parts list and pricing from the manufacturer, distributor, or reseller of the
Trailer TMA.
Figure 2 shows the schematic of the wiring details of the Trailer TMA. Also, detailed
instructions on the wiring of the trailer TMA are provided in a separate Wiring Manual and will
not be repeated herein.