Gregory TTMA-100, Assembly Manual

Page: 20 / 49

16
•
Lift up the open end of the mandrel
and slide in the white plastic guide
plate at the bottom between the
mandrel and the energy absorbing
tube. Adjust the plastic guide plate
until the holes for the shear bolt on
the energy absorbing tube,
mandrel, and the guide plate are
properly aligned. Use the drift pin
to hold mandrel and white plastic
guide plate in place.
•
Slide the top black plastic guide
plate between the mandrel and the
energy absorbing tube. Adjust
mandrel and plastic guide plate
until the holes for the shear bolt on
the energy absorbing tube,
mandrel, and the plastic guide plate
are properly aligned.
•
Insert shear bolt with washer
through the aligned holes through
the top of the energy absorbing
tube, the black plastic guide plate,
the mandrel, the white plastic
guide plate, and the bottom of the
energy absorbing tube.