GreenWorks 21132 Owner'S Manual Download Page 3

3

GENERAL SAFETY RULES

W A R N I N G

Read and understand all instructions before using this product.

 Failure to follow all 

instructions listed below may result in electric shock, fire, and/or serious personal injury.

• Do not operate power tools in explosive atmospheres, such as in the presence of flammable 

liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.

• 

Do not allow children or untrained individuals to use this unit.

• 

Don’t expose power tools to rain or wet conditions. Water entering a power tool will increase  

the risk of electric shock.

• 

Do not handle plug or tool with wet hands.

• 

Never allow children to operate the equipment. Never allow adults to operate the equipment 

without proper instruction.

• 

Always wear safety glasses with side shields. Everyday glasses have only impact resistant 

lenses. They are NOT safety glasses. Following this rule will reduce the risk of eye injury. Use 

face mask if operation is dusty.

• 

Wear eye protection when operating this product.Secure long hair above shoulder level to 

prevent entanglement in moving parts.

• 

Use extra care when cleaning on stairs.

• 

Do not expose to rain, store indoors.

• 

Do not operate in poor lighting.

• 

Keep all parts of your body away from any moving part.

• Keep hair, loose clothing, fingers and all body parts away from openings and moving parts.
• Wear heavy long pants, boots, and gloves. Avoid loose garments or jewelry that could get  

caught in moving parts of the machine or its motor.

• Do not force tool. Use the correct tool for your application. The correct tool will do the job 

better and safer at the rate for which it is designed.

• 

Do not operate the equipment while barefoot or when wearing sandals or similar lightweight 

footwear. Wear protective footwear that will protect your feet and improve your footing on 

slippery surfaces.

• 

Secure long hair so it is above shoulder level to prevent entanglement in any moving parts.

• Keep firm footing and balance. Do not overreach. Overreaching can result in loss of balance.
• 

Do not allow to be used as a toy. Close attention is necessary when used by or near children.

• 

Do not use tool if switch does not turn it on or off. Any tool that cannot be controlled with the 

switch is dangerous and must be repaired. 

• 

Keep all bystanders, children, and pets at least 50 ft. away.

• Do not operate this unit when you are tired, ill, or under the influence of alcohol, drugs, or  

medication.

• 

Do not operate in poor lighting.

Summary of Contents for 21132
























Reviews: