15
OPERATION
CHARGING PROCEDURE
(
See Figure
10
.
)
CHECKING THE CHARGE
If the battery pack does not charge properly:
•
Check the current at the power outlet with another tool. Make sure that the outlet is not
turned off.
•
Check that the charger contacts have not been shorted by debris or foreign material.
•
If the surrounding air temperature is not normal room temperature, move the charger and
battery pack to a location where the temperature is between 45
˚
F and 104
˚
F .
NOTE:
The battery is not shipped fully charged. It is recommended to fully charge before first use
to ensure that maximum run time can be achieved. This lithium-ion battery will not develop a
memory and may be charged at any time. A fully discharged battery pack will require approximately
3 hours to fully charge from a discharged state.
1. Plug the charger into an AC power outlet.
2. Insert the battery pack (3) into the charger.
This is a diagnostic charger. The Charger LED Lights will illuminate in specific order to communicate
the current battery status. They are as follows:
CHARGING PROCEDURE (
LED INDICATOR
)
BATTERY IS CHARGING:
FULLY CHARGED:
BATTERY IS TOO WARM:
(REMOVE FOR APPROX. 30
MINUTES TO ALLOW TO COOL)
DEFECTIVE BATTERY:
(REMOVE AND REPLACE WITH
NEW BATTERY IF THIS OCCURS)
NO BATTERY PRESENT
RED
RED
GREEN
GREEN
RED
RED
RED
RED
BLINKING
RED
BLINKING
GREEN
3
2
1
Fig.10
Summary of Contents for 21132
Page 21: ...21 EXPLODED VIEW...
