GreenWorks 21132, Owner'S Manual

Page: 10 / 23

10
ASSEMBLY INSTRUCTION
AUXILIARY HANDLE (
See Figure 3.)
W A R N I N G
To avoid injury, adjust the auxiliary handle for optimum control and balance. Do not overreach
when operating grass trimmer/edger. Keep proper balance atall times for better control of the tool
in unexpected situations.
CUTTIN
CONNECTING UPPER/LOWER TRIMMER SHAFTS
G LINE (
See Figure 4.)
line needs replacing, insert a new spool.
To avoid injury, always remove the battery pack before installing the guard, changing a cutting
line, or making any adjustments.
With lower shaft pointing downward insert lower shaft into upper shaft and turn shaft collar
clockwise to tighten.
To remove the spool:
1. Disconnect trimmer from the power supply.
2. Turn grass trimmer/edger over to access the spool.
3. Remove spool cover by pressing on two tabs parallel to each other on the side of the cover (2).
4. Remove the spool (1) from the spool housing (3).
Fig. 3.4 Fig. 3.1 Fig. 3.2 Fig. 3.3
Press button Rotate handle to desired
position
Open latch and loosen Slide handle to desired
position.
Tighten latch