SAFETY INSTRUCTIONS
General precautions for safety when working with power tools.
Warning!
Safety precautions should be read and
all instructions.
Failure to follow all warnings
and instructions may result in a shock.electric shock, fire and serious injury.
Keep all warnings and instructions for future reference.
The term "power tool" in cautions refers to the manual (connected to the wire)
power tools or cordless (cordless) power tools.
1. Safety in the workplace
a.
Keep the workplace clean and well-lit.
Disorder or
dark places lead to accidents.
b.
Do not operate power tools in explosive atmospheres, such as
which are present in flammable liquids, gases or dust.
Power tools generate
Sparks that can ignite the dust or emitted gases.
c.
Do not allow the presence of children and unauthorized persons while working with
power tools.
You can get distracted and lose control.
2. Electrical safety
a.
The power tool plug must match the outlet.
It is forbidden by any
Modify the plug.
Do not use the adapter plugs when operating
with grounded (closed to the ground) power tools.
Unmodified plugs
and sockets reduce the risk of electric shock.
b.
It is necessary to avoid contact of the body with earthed surfaces, such as pipes,
radiators, cookers and refrigerators.
There is an increased risk of impact
electric current if your body is grounded.
c.
Do not expose power tools to rain or wet conditions.
Water entering a power tool will create a risk of electric shock.
d.
Do not use the power cord for other purposes.
It is forbidden to use
power cord for carrying, moving or disconnecting the power tool plug from
supply network.
Do not allow the power cord to come into contact with heat, oil,
objects with sharp edges or moving parts.
Damaged or tangled
cords increase the risk of electric shock.
e.
When working with electric tools on the street, use an extension cord suitable for
work in the open air.
Use of a cable suitable for outdoor use
air, reduces the risk of electric shock.
3. Personal security
a.
It is necessary to remain vigilant, to observe what is happening and to use
common sense when working with power tools.
It is forbidden to use
Power tools if you are tired or under the influence of drugs, alcohol
or drugs.
Deterioration of attention while working with power tools can lead to
serious injury.
b.
It is necessary to use personal protective equipment.
Always wear protective equipment
eye.
Protective equipment, such as a dust mask, non-skid shoes,
protective helmet or hearing protection will reduce the risk of injury if used
properly.
c.
Prevents accidental triggering.
Make sure that the switch is
in the off position, before connecting the power source and / or battery, and
also when lifting or carrying the tool.
Transfer of power tools when the finger
