is on the switch, or power is supplied to power tools whose switch
is included, leads to accidents.
d.
It is necessary to remove adjustment devices or a wrench before switching on
the electrotool.
The wrench or device remaining attached to the rotating part
power tool may result in injury.
e.
Do not go too far when working.
It is necessary to maintain all the time
the right rack and balance.
This provides better control of the power tool in
unforeseen situations.
f.
Correctly dress.
Do not wear loose clothing or jewelry.
Should
pick up your hair, remove clothes and gloves away from moving parts.
Free
clothing, jewelry or long hair can get into moving parts.
g.
If the devices are intended for connection to devices for removing and collecting dust,
you need to make sure that the devices are connected and properly used.
Using a dust collection device will reduce the likelihood of hazards,
connected with dust.
4. Using and servicing the power tool
a.
Do not overload the power tool.
Use the power tool to
purpose.
A good power tool will do the job better and safer at
speed for which it was designed.
b.
Do not use the power tool if the circuit breaker does not work.
Any
An electric tool that can not be controlled by a switch is dangerous and must
be repaired.
c.
Unplug the power tool from the power source before performing any
adjustments, replacement of accessories or storage of power tools.
Such
preventive safety measures reduce the risk of accidental activation
power tools.
d.
Keep electric tools out of the reach of children.
it is forbidden to work with
power tools to people unfamiliar with it or with these instructions to
power tools.
Power tools are dangerous in the hands of inexperienced users.
e.
Servicing of power tools is required.
Check mismatch
or jamming of moving parts, breakage of parts or other situations that may
to influence the work of power tools.
If the power tool is damaged,
must be repaired before use.
Many accidents have occurred because of
poor maintenance of power tools.
f.
Maintain sharpening and cleanliness of cutting tools.
Cutting tools that
correctly serviced, in which sharp cutting edges are less often clamped and lighter
are controlled.
g.
It is necessary to use electric tools, accessories, insert cutters, etc.
at
in accordance with these instructions, taking into account the conditions and work performed.
Use of power tools for operations that differ from intended
use, can lead to a dangerous situation.
5. Using the Battery Tool and Maintaining It
a.
Recharge only with the charger indicated
manufacturer.
A charger that is suitable for one type of battery,
may create a fire hazard when used with a different battery.
b.
Only use power tools with specially designed power tools.
batteries.
Any other battery
create a risk of injury and fire.
c.
When the battery is not in use, it must be kept away from others
Metal objects such as paper clips, coins, keys, nails, screws or other
small metal objects that can form a single connection
