background image

100-240 VAC  
Output voltage  
24 V DC  
Output current  
2200 mA  
Sound pressure level in accordance with EN ISO 11680-1:  
Sound Pressure (LpA) 78 dB (A), Uncertainty (K) 3 dB (A)  
Sound power level in accordance with EN ISO 3744:  
Sound power (LWA) 98 dB (A), uncertainty (K) 3 dB (A)  
The total vibration value (three-component sum of vectors) in accordance with standard EN 60745:  
Cutting of recently felled coniferous species (ahW) = <2.5 m / s2,  
uncertainty (K) 1.5 m / s2  
 
 

TROUBLESHOOTING AND TROUBLESHOOTING

  

 

Malfunction

  

 

Possible reason

  

 

Corrective action

  

Bus and chain operation is accompanied by heating and smoke. Check for item excess chain tension.  
Empty tire grease reservoir.  
 
Pull the chain. Talk to list 

chain Tension

 earlier given in this guide.  Check the oil reservoir tires. 

The motor is running, but the circuit is not rotates. The chain is too tight. Check the assembly of the 
guide tires and chains. Check the guide rail and chain for damage. Re-tension the chain. Refer to the 

Tension 

section. 

chain

 , previously given in this guide. Refer to the 

Replacement 

section. 

tires and 

chains

 , previouslygiven in this guide. Check the guide rail and chain.  

 
 

DISPOSAL CONSIDERATIONS

  

Power tools and accessories contain a large number of valuable resources and plastics that  
can be recycled. Defective electrical appliances must not be disposed of together with  
household waste. Please dispose of them in specially equipped places. Please contact  
waste management advice to the local administration or retailer.  
 
 

EU DECLARATION OF CONFORMITY

  

Machinery Directive  
2000107  
Greenworks tools declares that the products described in the section "Technical Data"  
comply with the provisions of the following documents:  
2006/42 / EC, EN ISO 11680-1  
These products also comply with Directive 2004/108 / EC.  
For more information, contact Greenworks tools at the following  
address.  
The undersigned is responsible for the preparation of the technical documentation and does so  
application on behalf of Greenworks tools.  
Place, date: Chang Jou, 09/02/2012  
Signed: Dennis Jacobson (Bachelor of Engineering, Dipl.-Ing., Member of the Institute of 
Technology  

Summary of Contents for 2000107

















Reviews: