GreenWorks Commercial GN 220, Owner'S Manual

Page: 16 / 96

15
TO INSTALL BATTERY PACK (See Figure 5)
• Open the battery compartment cover (1).
• Alight the battery (2) with the cavity in the snow thrower housing on the right side of the unit. (If
standing behind the handles)
• Insert the battery into the right battery compartment to start the snow thrower. This snow
thrower is equipped with a battery storage compartment to store an extra battery pack.
• Slide the battery down to lock it into position. The battery is fully inserted into the snow
thrower when you hear an audible “click”.
• Close the battery compartment cover.
Fig. 5
TO REMOVE BATTERY PACK (See Figure 5)
• Ensure that the impeller has come to a complete stop.
• Release your grip on the bail lever to stop the snow thrower.
• Press the battery release button (3). This will cause the battery to raise out of the tool slightly.
• Remove the battery pack from the snow thrower.
ASSEMBLY INSTRUCTION
1
2
3