38
Lubricating Center and Side Stand Pivot Points
Apply SAE 30W oil or a multi-purpose spray-on chassis grease to the pivot
bolts of both sides of the center stand and the side stand.
Adjusting Seat Latch Release Cable
On models with ignition switch- operated seat unlocking, there is an
actuating cable running between the ignition switch and the latch. The
tension of the cable must be tight enough to activate the latch mecha-
nism, but not so tight that it holds the latch open.
Location of cable adjuster, as viewed from front of bike though panels.
Adjustment is by a threaded collar and locknut at the ignition switch end.
Access requires removal of the screws securing the front and rear steer-
ing column cowlings, cargo hook, and ignition switch bezel. The ignition
bezel is removed by turning it approximately 1/8 of a turn counter-clock-
wise and then pulling it out.
Tires
Your MOTORINO™ comes equipped with high-quality tubeless tires be-
cause, ultimately, they are the only thing between you, your MOTORINO™,
and the hard, unforgiving pavement. All going, turning, and stopping
happens through your tires. Take good care of them.
Maintenance
Summary of Contents for MOTORINO XP SERIES
Page 1: ...Owner s Manual XP Series...
