31
Check axle nuts/bolts, brake caliper bolts (pages 33, 34, 31, and 32).
Inspect wires and cables on front fork and rear swing arms.
Check circuit breaker terminals have not come loose (page 17).
Every Six Months
Check wheels for bearing play (page 37).
Check steering column for bearing play (page 37).
Yearly
Purge brake hydraulics with fresh fluid, bleed systems (page 34).
Maintenance Procedures
WARNING!
The instructions here are intended for people with sufficient me
-
chanical aptitude and experience to work on motor vehicles and
bicycles. If in doubt about your abilities to carry out any of these
procedures, refer inspection and servicing to your MOTORINO
™
dealer.
Brake Rotor Bolts
See diagrams on pages 32 and 33. These are the M8 diameter socket-
head bolts that secure the disc brake rotors to the wheel hubs. There are
3 or 4 per rotor and they usually require a 6mm allen hex bit. Use a sharp
unworn socket style allen bit to avoid stripping the bolt head.
Check them by applying 18-20 ft-lbs of torque to each one. If a bolt
moves, remove that bolt and re-install it with a drop of medium-strength
thread locker (LocTite™ 242 or equivalent) on the leading threads and
torque to the above spec.
Maintenance
Summary of Contents for MOTORINO XP SERIES
Page 1: ...Owner s Manual XP Series...