IPM-400
13
Using the IPM-400 as a Source
Select the Source mode by pressing the
DISPLAY/SOURCE/READ
button until “SOURCE”
appears on the display. Pressing the button two more times displays both “SOURCE” and
“READ”. This applies to specific functions.
Using SOURCE Outputs
Outputs are adjustable with the digital pot. When you need to adjust the output, flip the toggle
switch to
SET
and turn the digital pot. To use stored values, flip the switch to
HI
or
LO
.
Storing Output Values
Output values can be stored into memory where they remain for later use or until you reset the
meter to the defaults. You can also move values from SET into HI or LO.
1.
Press the
DISPLAY/SOURCE/READ
button until “SOURCE” appears on the display.
2.
Flip the toggle switch to
HI
or
LO
.
3.
To change the output value, turn the digital pot.
4.
Press the
STORE/RESET
button to store the value.
5.
To transfer the value in SET to HI or LO, press and hold
STORE/RESET
while moving the
switch to
HI
or
LO
. The display flashes once and the unit beeps once.
6.
Release
STORE/RESET
.
7.
To use a stored value, flip the toggle switch to
HI
or
LO
.
