manualshive.com logo in svg

Greenlee CCCX, Instruction Manual, Page: 6 / 26

Share
Download
Greenlee CCCX Instruction Manual Download Page 6

Greenlee / A Textron Company

6

4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070

CCCX and CCCXC Tools

Identification

Identification

Specifications

CCCX and CCCXC

1.

Housing

2.

Retract Button

3.

Power Cord

4.

Trigger

5.

Head

6.

Latch (for opening head)

7.

Adapter Release Buttons

Tool

Length ............................................................................................... 371 mm (14.6")

Width ........................................................................................................ 76 mm (3")

Height .................................................................................................. 279 mm (11")

Mass/Weight ..................................................................................... 4.02 kg (8.9 lb)

Sound Level ........................................................................... < 75 dB (A) at 1 meter

Vibration .................................................................................................... < 2.5 m/s

2

Motor Voltage

CCCX11 ............................................................................ 120 VAC, 60 Hz, 2.1 A

CCCX22 ............................................................................ 230 VAC, 50 Hz, 1.1 A

Hydraulic Oil .................................................... 50 ml (0.1 pint) of Shell Tellus

®

 T 15

Crimping Tool

Maximum Crimping Cable Size ................... 600 kcmil copper; 350 kcmil aluminum

Crimping Time .......................................................................................... 4 seconds

Cutting Tool

Maximum Cutting .................................... 40 mm (1-1/2") kcmil aluminum or copper

2

4

1

3

6

7

5

Summary of Contents for CCCX



























Reviews:

No comments