Greenlee / A Textron Company
5
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
CCCX and CCCXC Tools
Note: Keep all decals clean and legible, and replace
when necessary.
Do not perform any service or maintenance other
than as described in this manual. Injury or damage
to the tool may result.
Failure to observe this precaution may result in
injury and property damage.
IMPORTANT SAFETY INFORMATION
Inspect tool, dies, and adapters before use.
Replace any worn or damaged parts. A damaged or
improperly assembled tool can break and strike
nearby personnel.
Failure to observe this warning could result in severe
injury or death.
• Do not operate tool without adapters. Damage
to the ram, tool head, or accessories may result.
• This tool is not designed for continuous use.
After 30 to 40 cycles, allow the tool to cool for
15 minutes.
• Do not place the tool in a vise. This tool is
designed for hand-held operation.
• Ensure that all bystanders are away from the
work area when operating the tool.
• Ensure that the work area is clean, dry,
uncluttered, and well-lit.
• Use this tool for the manufacturer’s intended
purpose only.
Failure to observe these precautions may result in
injury or property damage.
Extension cords:
• Use only 16, 14, or 12 AWG
extension cords.
• Do not use extension cords that
are longer than 30 m (100').
• Repair or replace damaged
extension cords.
Failure to observe these warnings
could result in severe injury or death.