background image

Greenlee Textron / Subsidiary of Textron Inc.

3

4455 Boeing Dr., Rockford, IL 61109-2988  815/397-7070

Fiber Optic Installation Kit

IMPORTANT SAFETY INFORMATION

This symbol is used to call your attention to hazards
or unsafe practices which could result in an injury
or property damage. The signal word, defined below,
indicates the severity of the hazard. The message
after the signal word provides information for prevent-
ing or avoiding the hazard.

Hazards or unsafe practices which, if not avoided,
MAY result in injury or property damage.

Hazards which, if not avoided, COULD result in
severe injury or death.

Immediate hazards which, if not avoided, WILL result
in severe injury or death.

SAFETY
ALERT
SYMBOL

Wear eye protection provided when
cutting and crimping fiber optic
cable.

Failure to wear eye protection can
result in serious eye injury.

Read and understand this material
before operating or servicing this
equipment. Failure to understand
how to safely operate this tool can
result in an accident causing
serious injury or death.

Do not use the microscope to examine a fiber optic
cable that is connected to a laser light source.

Failure to observe this warning can cause serious
eye injury and permanent blindness.

Work carefully when cutting fiber optic cable.
Use adhesive tape to gather, and dispose of, glass
shards and any other hazardous objects.

Failure to observe this warning can cause serious
injury and permanent blindness.

This kit contains a primer and an adhesive, which
can cause skin irritation. Handle with care to
prevent skin contact with primer and adhesive.

Summary of Contents for 45658

























Reviews: