GREENIS 150W Slow Juicer, Instruction Manual

Page: 9 / 12

15 14
Directions for Use
This device is fitted with a protection system
,
it will only work
normally when all components are assembled correctly
.
Connect power plug with socket outlet and switch on the power.
Place pitchers under two outlets (juice & pulp outlets)
It is normal that the device makes squeaking noise when starting.
This noise is caused by friction between spinning brush and parts
inside juicing bowl. Sounds will disappear after food is inserted.
Caution
Switch on the device and slowly
feed cut up pieces of food down
the feed tube.
Do not operate with wet hands.
Violating the warning may cause
serious injury or electric shock.
Rinse everything thoroughly before
putting into the machine.
Do not put excessive volumes of food
or press food hard into device, this may
cause clogging, leaks or damage.
Please use only the tamper to assist with
guiding food into bowl, do not use any other
implement like spoons in the feed tube.
This will cause damage to the machine.
What to do if the squeezing screw stops working when in use:
Too hard, too much or incorrectly prepared food being stuffed into
the device may cause the protection system to activate and stop
the appliance running.
Reverse button needs to be held down. If the juicer still does not work after above in
structions are followed, please unplug, disassemble and clean the juicer thoroughly.
This includes unclogging any debris from the stopper on the underside of the juicing
bowl.
Frequently juicing food that is too hard or pushing too much food in at once may
shorten product lifespan.
A.Switch the device to the off position.
B.Push reverse button without releasing
for 3-5 seconds, repeat this step2-3 times.
NB: You may see food moving back up and
out of the feed tube, this is normal.
C.Resume juicing as normal after reverse
rotation ends.