GREENIS 150W Slow Juicer, Instruction Manual, Page: 11 / 12

19 18
come out of the waste chute. You do NOT need to "clump" the grass into a ball like
you used to do with the centrifugal juicers. In fact, you can slowly feed small strands
of grass, coriander, parsley and other leafy greens without any problem at all! You
can also juice kale and spinach in the same way.
A great tip for large leafy, stringy or fibrous vegetables vegetables is to remove the
leaf from the stem, cut both leaves and stems into 3-5cm lengths and feed through
gently, letting the auger pull the ingredients into the juicer, using the tamper only
gently if required.
Tip #2) Juice low-fibre plants first, and high-fibre plants last
Here's a really important tip: If you're going to juice high-fibre plants like celery or
spinach, juice them last! Why? Because the fibres in celery tend to accumulate in the
ejection port in the juicing bowl at the bottom of the juicing auger. If this port
becomes clogged, then "pulp overflow" will occur, sending extra pulp into your juice.
Following Tip #1 will minimise the chances of this occurring to almost zero.
As long as the port stays open, the pulp in your juice will be minimised. So the best
way to do this is to juice your low-fibre fruits and veggies first: Apples, carrots, etc.
Save the more stringy, fibrous plants for last. You'll get a much better result.
Tip #3) Juice your juice!
If you still find too much pulp in your juice, just pour the juice back through the
machine again! You'll find that the second time through, nearly all the pulp is
removed.
You can also strain it through a nut-milk bag, or the fabric cloth that came in your
tofu box.
The bottom line is that if you follow these three tips, you'll find that the GREENIS
Juicer produces very little pulp in the final juice and does not block.
NB: After you have had your juicer for some time, please check that the silicon wiper
blades have not worn, this can also cause extra pulp in the juice.
Cleaning and Maintaining Your Juicer
1.
Turn device “OFF”. Please do not touch the plug with wet hands.
2.Twist the hopper to unlock by grabbing the two outlets. Make sure the arrow is
aligned with open side before pulling off the bowl.
3.Disassemble the device in reverse to assembly order.
4.Rinse it using cleaning brush with flowing water after disassembling do not use
metal sponge to clean, otherwise it will scratch and damage the device. Do not
clean it in the dishwasher.
5.Do not immerse or rinse the main body under water, use dry towel or wet sponge
to clean.
6.Let the parts dry in an open, clean and drafty space after washing. Store it out of
reach of children.
In order to extend the product service life, please clean it promptly after usage.
If it appears that the plastic of the containers and parts is very dry, wipe with
cooking oil and then wash with gentle detergent to clean.
Self Clean
When making more than one juice, it is not necessary to disassemble after juicing
each different type of food,
a quick self clean will ensure juice flavours do not mix.
1. Ensure the pitchers are underneath both the waste and juice chutes. Turn off
juicing tap.
2. Switch on the juicer and pour a bowl of clean water slowly into the feed tube.
3. Turn on juicing tap drain water after juicing bowl is clean.
NB: Please disassemble fully after juicing is complete and follow the cleaning
instructions found in this manual.