GREENIS 150W Slow Juicer, Instruction Manual

Page: 8 / 12

13 12
3.Product Assembly
A.As shown in the pictures below , place the juicing bowl onto the base.
When placed properly, ensure that juicing bowl is fully pressed into the base and
firmly attached.
B.As shown in the sequence in the below picture, place the screen and squeezing
screw into the spinning brush.
When assembled, the components in the spinning brush can rotate smoothly.
C.Place the kit after being assembled (juicing screen,
squeezing screw and spinning brush) into juicing
bowl, by lining up the dot on the top of the juicing
screen with the dot on the side of the juicing bowl.
Ensure that bottom of the squeezing screw is
engaged onto the motor shaft.
When placed properly, rotate the juicing screen
slightly the juicing screen and squeezing screw
cannot be rotated after being placed properly and
the screen sits flat and level.
D.Engage the hopper with the juicing bowl as shown on the picture, lining up the dot
on the side of the hopper with the dot on the side of the juicing bowl and turning
into place.
The device can only work when hopper and juicing bowl is fixed properly. If
experiencing difficulty please ensure screen and squeezing screw are correctly
inserted.
E.If desired install the de-foaming tap onto juice outlet, place juice pitcher and pulp
pitcher under juice outlet and pulp outlet accordingly. When using the tap ensure
you do not fill the bowl with liquid more than 1/3rd the way up the bowl to avoid
leakage onto base.