Greenheck Vari-Green 309025, Installation, Operation And Maintenance Manual

Page: 33 / 92

,.•.•• --- B"
CW - Direct Drive Dimensions
1
Model A B**
C
Wall
I
Damper
Damper
Mountlngl
Opening , Size
Frame
Bolt
SIze Circle
CW-060, 065,
18%
13Y2
14';' 8Y2 8
110/.
070,075
(467)
(343) (375) (216)
(203)
10
(254)
(298)
CW-OSO, 085,
21 13% 17Va
10Y2 10
12 15
090
(533) (340) (454)
(267) (254) (305)
(381)
CW-095
21
15V.
17Va 10Y2 10
12 15
(533) (387) (454)
(267) (254)
(305) (381)
CW-098, 101,
24Va
28V.
190/4
12Y2
12
14 16Va
121,131
(632) (718) (502)
(318) (305)
(356) (429)
CW-141,161
28Va
290/. 22~ 15Y2
15 17
19%
(733) (756)
(562) (394)
(381) (432)
(492)
CW-180,200
35% 28% 270/.
17Y2 17 19
25
(905) (727) (705)
(445) (432)
(483) (635)
All ~Imenslons In I~hes (millimeters). 'NOTE: 2 Inches minimum, 8 Inches when motorized
optlOll Is required
May vary depending on motor size
----B
eWB - Belt Drive Dimensions
Model A B**
C
Wall Damper
Damper Mounting
Opening
Size
Frame Bolt
Size Circle
CWB-098,101,
24Va
28V.
190/.
12Y2
12 14 16Va
121,131
(632) (718) (502) (318) (305)
(356) (429)
CWB-141,161
28Va 290/4
22~ 15% 15 17 19%
(733) (756) (562) (394)
(381) (432) (492)
CWB-180,200
35% 28% 270/.
17Y2
17 19 25
(899)
(727) (705) (445) (432) (483) (635)
CWB-220, 240
42'%1 33'h
31V. 20'h
20 22 28%
(1087) (860) (794)
(521)
(508)
(559) (721)
CWB-300
50 36 38%
25'h
25 27 35'%,
(1270) (914) (975) (648) (635) (686) (910)
All ~lm~slons In Inches (m,n1meters).'NOTE: 2 Inchss minimum, 7 Inches when motorized
opt,on
IS
required. "May vary dapendlng on motor slza.
Receiving
Upon receiving the product, check to make sure all
items are accounted for by referencing the bill of lading
to ensure all items were received. Inspect each crate for
shipping damage before accepting
delivery. Notify the
carrier if any damage is noticed. The carrier will make
notification
on the delivery receipt acknowledging any
damage to the product. All damage should be noted on
all the copies of the bill of lading which is countersigned
by the delivering carrier. A Carrier Inspection
Report
should be filled out by the carrier upon arrival and
reported to the Traffic Department.
If damaged upon
arrival, file a claim with carrier. Any physical damage
to the unit after acceptance is not the responsibility of
Greenheck Fan Corporation.
Unpacking
Verify that all required parts and the correct quantity
of each item have been received. If any items are
missing, report shortages to your local representative to
arrange for obtaining missing parts. Sometimes it is not
possible that all Items for the unit be shipped together
due to availability
of transportation and truck space.
Confirmation of shipment(s) must be limited to only
items on the bill of lading.
Handling
The motor amperage and voltage ratings must be
checked for compatibility
to supply voltage prior to
final electrical connection. For CW/CWB installations,
a~.c!~~I_CW/~~~!:,~!.rJfU9~!. ~id~w_al~au,"- !an!.-
the electrical supply should be routed through the
conduit chase located between the mounting
plate and
the bottom of the motor compartment. Wiring must
conform to local and national codes.
CAUTION
Do not lift by the fan hood. Avoid lifting fans in a
way that will bend or distort fan parts. Never pass
slings or timbers through the venturi of fan. Fans
with special coatings or paints must be protected
in handling to prevent damage.
Storage
Fans are protected against damage during shipment. If
the unit cannot be installed and operated immediately,
precautions need to be taken to prevent deterioration of
the unit during storage. The user assumes responsibility
of the fan and accessories
while in storage. Greenheck
Fan Corporation will not be responsible for damage
during storage. These suggestions are provided solely
as a convenience to the user.
Indoor
The ideal environment for the storage of fans and
accessories is indoors, above grade, in a low humidity
atmosphere which is sealed to prevent the entry of
blowing dust, rain or snow. Temperatures should be
evenly maintained between 30" to 110"F (-1" to 43"C)
[JJ.