GreenFlux T2235-02, Installation Manual, Page: 5 / 35

GreenFlux Dual Socket Smart Charging Controller page - 5 - ©GreenFlux Assets B.V. – All rights reserved.
Installation Manual; version 4.6; 2019-11-05 Doc.nr. GFX.2017.14201807
1 INTRODUCTION
This manual describes how to install the Smart Charging Controller in a safe and
correct way. By following the instructions in this manual, the controller can be
installed correctly in the charging station.
The functionality described in this document is made available by the current
latest firmware, version
v4.3.2 .
The controller serves as central processor and controller for managing and
controlling the charging station hardware. Using the controller, the charging
station can connect to any charging station management platform via OCPP. It is
also possible to use the controller in offline mode. This manual does not describe
the configurations needed for the controller to function, for this we refer to the
GreenFlux Smart Charging Controller Configuration Manual . Configuration
changes can be executed either via OCPP by the charging station management
platform or locally using the local management website tool provided with the
controller (described in Section 5).
To give certain aspects more emphasis, the following two pictograms will be used
in this document:
Warning! This text is important for the (personal) safety and/or the
correct functioning of the system (charging station).
Informative. This text adds extra information to a certain subject.
In case of any questions not covered by this manual, please contact GreenFlux via
info@greenflux.com .