Greenfire Pellet Stove and Insert Technical Manual
2
Safety Note:
If this stove is not properly installed, a house fire may result. For your safety,
follow the installation instructions, contact local building, fire officials, or authority having jurisdiction about restrictions
and installation inspection requirements in your area.
The authority having jurisdiction should be consulted before installation to determine the need to obtain a permit.
Emissions and Efficiency - GF55 / GFI55:
This manual describes the installation and operation of the Regency
GF55/GFI55 pellet heaters. This heater is U.S. ENVIRONMENTAL PROTECTION AGENCY certified to comply with
2020 particulate emission standards. Under specific test condition this heater has been shown to deliver heat at
rates raging from:
8,894 - 45,000 Btu/hr
Efficiency:
74.5% LHV / 70% HHV
FIRE EXTINGUISHER AND SMOKE DETECTION
: All home with a pellet burning stove should have at least one
fire extinguisher in a central location known to all the household. Smoke detectors and carbon monoxide detectors
should be installed maintained in the room containing the stove. If it sounds the alarm, correct the cause but do not
deactivate. You may choose to relocate the smoke the smoke detection device within the room;
DO NOT REMOVE
THE SMOKE OR CARBON MONOXIDE DETECTORS FROM THE ROOM.
WARNING:
This wood heater needs periodic inspection and repair for proper operation. It is against federal regulation
to operate this wood heater in a manner inconsistent with operating instructions in this manual.
WARNING:
This wood heater has a manufacturer set minimum low burn rate that must not be altered. It is against
federal regulations to alter this setting or other wise operate this wood heater in a manner inconsistent with operating
instructions in this manual.
0268PM025E
