Green Technik CIP 1500, Operation And Maintenance Handbook

Page: 26 / 43

CIP 1500 – User and Maintenance Manual
25
Chapter 11
ROUTINE MAINTENANCE
CAUTION!
Risk of injury
Before starting any servicing or setting operation, switch
off the engine and take off the key from the control panel.
Carrying out the above mentioned operations require
wearing safety gloves, goggles or face shield, ear
protectors and safety shoes.
CAUTION! Never turn the flywheel with hands. Before approaching
the blades or counter-blade with hands, make sure the
flywheel is completely still
.
11.4 Replacing the blades
„
Switch off the engine and make sure
the flywheel is completely still.
„
Loosen the screws (A) in the fixed
cover and turn it over.
„
Lock the disk (D) by putting a wooden
wedge between the disk and the
machine body wall panel
„
Loosen the blade fastening screws (V)
and take them off.
„
Check the blade (C) : if the opposite
cutting edge is sharp, simple reverse
the blade position and lock it.
Otherwise, replace the blade with a
sharpened one
.
„
Repeat this procedure for the other
blades.
NOTE: When turning the flywheel, take
all precautions as required.
Before removing the blades,
make sure the flywheel is
completely still.
Insert the locking wedge.
„
Adjust blades and counter-blade as
described at the previous paragraph.
„
Check all screws are tight.
„
Put in place the upper fixed cover and
secure it with screws.
V
C
D A V
D