www.GreenSeriesFitness.com
©April 2017
Call Toll free (800) 269-7130
CIR-RB7000E-G1 Revision 1.0
10
John C. Jensen
UNPACKING & ASSEMBLY
Unpacking your recumbent bike where will be using it. Being careful not to damage. Place your
recumbent bike on a level flat surface. It is recommended that you place a protective covering on your
floor.
*Notice:
Because of heavy weight, please assemble this recumbent bike more than two people.
Step1:
Assembly Front/Rear Stabilizer with Main Frame.
1). Please remove the pre-lock screws on the front and back affixed poles.
2). Using (2) M8x20mm screws and washers, fix the front base tube with the main frame. (The wheel of
front affixed poles should be forward.)
3). Using (2) M8x20mm screws and (2) and washers, fix the rear base tube with the main frame. (The
wheel of the back affixed poles should not make any difference of forward or backward.)
X1
X1
X 4
M
8
x
2
0
m
m
X 4
M8
#5-1
#5-2
#5-3
#5-4
X 4
M8
wash
e
r
#5-10
Allen wrench
(6mm)
