Gree U-MATCH GFH09K3CI, Service Manual

Page: 43 / 264

A/A DC INVERTER U-MATCH AIR CONDITIONERS CONTROL
40
4.4.5 Swing Control Function
Under on-state of unit, press
Function
button till the unit enters swing control function and then press
“Enter/cancel “ button to turn on “swing” control function.
During swing function, press
Function
button till the unit enters swing control function and then press
Enter/cancel
button to cancel swing control function.
Swing control function setting is shown in Fig 4.4.5
Fig. 4.4.5
4.4.6Timer Setting
Press
Timer
button to set timer off of the unit. Under off-state of the unit, press
Timer
button to set timer on of
the unit in the same way.
Timer on setting: Under off-state of the unit without timer setting, if
Timer
button is pressed, LCD will display
xx.
Hour,
with
ON
blinking. In this case, press ▲ or ▼ button to adjust timer on and then press Timer to confirm. If
Mode
button is pressed before pressing
Timer
button to confirm, timer mode will be switched to timer off setting mode. In
this case, LCD displays
xx. Hour,
with
OFF
blinking. In this case, press ▲ or ▼ button to adjust timer off and then
press Timer to confirm. When LCD displays
xx. Hour On Off, xx. Hour
means time of timer on, but time of timer off
won’t be displayed.
Timer off setting: Under
on-state
of the unit without timer setting, if
Timer
button is pressed, LCD will display
xx.
Hour,
with
OFF
blinking. In this case, press ▲ or ▼ button to adjust timer on and then press Timer to confirm. If
Mode
button is pressed before pressing
Timer
button to confirm, timer mode will be switched to timer on setting
mode. In this case, LCD displays
xx. Hour,
with
ON
blinking. In this case, press ▲ or ▼ button to adjust timer on and
then press
Timer
button to confirm. When LCD displays
xx. Hour On Off, xx. Hour
means time of timer off, but time
of timer on won’t be displayed.
Cancel timer: After setting of timer, if
Timer
button is pressed, LCD won’t display
xx. Hour
so that timer
setting is canceled.
Timer off setting under
on-state
of the unit is shown as Fig.4.4.6