Working temperature range
smooth surface
improper expanding
shaper
the length is equal
downwards
union pipe
pipe
leaning damaged crack
surface
Remove the union nut on
expander
pipe
C: Put on suitable insulating pipe
uneven
thickness
the indoor connection
hard
mold
Notice
●
●
B: Remove the burrs
●
D: Put on the union nut
Expand the port with expander
.
●
E: Expand the port
"
A
"
is different according to the diameter, please
refer to the sheet below:
Remove the burrs with shaper and prevent
●
F: Inspection
pipe
pipe and outdoor valve;
install the union nut on
the pipe.
43/26
32/23
27/-
Check the quality of expanding port
.
If there
24/18
Outdoor side
DB/WB(°C)
Maximum
cooling
Notice
For some models:
●
Maximum
heating
Indoor side
DB/WB(°C)
12
the burrs from getting into the pipe
.
is any blemish, expand the port again acco
-
rding to the steps above
.
52/32
32/23
27/-
24/18
Outdoor side
DB/WB(°C)
cooling
Maximum
Notice
●
The operating temperature range (outdoor tempera
-
ture) for Low-temperature cooling only unit is
-15°C~43°C; for Low-temperature heat pump unit
is -22°C~43°C.
Maximum
heating
Indoor side
DB/WB(°C)
Notice
●
The operating temperature range (outdoor tempera
-
ture) for cooling only unit is -18°C~52°C; for Low-
temperature heat pump unit is -30°C~52°C.
The operating temperature range (outdoor tempera
-
ture) for cooling only unit is
-15°C~43°C;
for heat
pump unit is -15°C~43°C.
For models:
GWH07QB-K6DNB2E
、
GWH09YC-K6DNA1Z
、
GWH09QB-K6DNB4Y
、
GWH12QB-K6DNB4Y
、
GWH18QD-K6DNA5X
、
GWH24AAE-K6DNA4Z
For models:
GWH18YE-S6DBA2A
、
GWH24YE-S6DBA2A
、
GWH09ACC-S6DBA1A
、
GWH12ACC-S6DBA1A
、
GWH18ACE-S6DBA1A
A(mm)
Max
Min
Φ6 - 6.35(1/4")
1.3
0.7
Φ9
-
9.52(3/8")
1.6
1.0
Φ12-12.7(1/2")
1.8
1.0
Φ15.8-16(5/8")
2.4
2.2
Outer diameter
(mm)
