drain vent
Drain hose
Place the outdoor unit on the support.
2. Fix the foot holes of outdoor unit with bolts.
foot holes
foot holes
at least 3cm above the floor
1. Remove the screw on the right handle of out-
handle
2.
gas valve
Remove the screw cap of valve and aim the
pipe joint at the bellmouth of pipe.
1. Connect the outdoor drain joint into the hole
3.
2.
union nut
(select it according to the actual inst-
Step 1:
fix the support of outdoor unit
Installation of outdoor unit
2.
chassis
outdoor drain joint
Notice
Step 4:
connect indoor and outdoor pipes
liquid pipe
gas pipe
door unit and then remove the handle.
screw
Step 2:
install drain joint
(Only for some models)
on the chassis, as shown in the picture below.
liquid
valve
Notice
Connect the drain hose into the drain vent.
allation situation)
1.
1.
Step 3:
fix outdoor unit
pipe joint
Select installation location according to
As for the shape of drainage joint, please refer
to the current product. Do not install the drainage
joint in the severe cold area. Otherwise,it will be
frosted and then cause malfunction.
expansion screws are needed.
the house structure.
Take sufficient protective measures when installing
the outdoor unit.
Make sure the support can withstand at least four
times of the unit weight.
The outdoor unit should be installed at least
3cm above the floor in order to install drain joint.
(for the model with heating tube, the installation
height should be no less than 20cm.)
For the unit with cooling capacity of 2300W~
5000W, 6 expansion screws are needed ; for
the unit with cooling capacity of 6000W~8000W,
8 expansion screws are needed; for the unit
with cooling capacity of 10000W~16000W,10
Fix the support of outdoor unit on the sele-
cted location with expansion screws.
Pretighten the union nut with hand.
8
