Dry Contact & 24 Volt Adaptor
2
2 Notices for Use
NOTICE
！
(1) This device use 24VAC for power supply. Do not connect other power to this
device. Otherwise, it may cause fire hazard or damage to the unit.
(2) Before touching the electric components, please be sure the appliance is
disconnected to power.
(3) Never install the appliance in a damp place or allow it to be exposed to direct
sunlight.
(4) Never install the appliance near heat source or a place that may easily get
splashes of water.
(5) Please install the appliance in a place without electromagnetic interference or
dusty particles.
(6) Make sure that the communication wires are connected to the correct ports,
otherwise communication failure will occur and may damage the appliance.
(7) Once wires are connected, use insulative tape to protect the wires from
oxidation and short circuit.
(8) Working conditions for the appliance:
①
Temperature: -20~+60°C;
②
Relative humidity: ≤85%;
③
Install it indoors and avoid direct sunlight, rain and snow.
(9) Thermostat should be configured for use with a conventional system.
(10) Functions with “*” are optional for indoor units. If a function is not included in an
indoor unit, the adaptor can’t set the function, or setting of this function is invalid
to the indoor unit.
