１
０
．１
１
０
．２
１
０
．３
１
０
．４
40
10.Care and maintenance
Warning: Please turn power off before maintenance.
Cleaning the filter
Take out the filter, use the dust collector to clean, if it is
too dirty could use the soap water to clean. Make sure to
dry the filter then can reinsert it.
Advice:
If the filter is too dirty that will affect the air in volume, so that make the system overloaded
and consum more than 6% of electric energy. So it is very necessary to clean the filter.
Cleaning the equipment, spare parts
Use the dry, soft cloth or vacuum cleaner to clean
the unit and wireless remote control. If the cloth is wet,
please dry it after cleaned.
Warning:
Never use the benzene, gasoline or something is hard to clean.
Never use the hot water (40 above) for cleaning, in order to avoid some spare part or part deformation.
Check in use
Check after use
Check that are there any obstructions block the air inlet or air outlet vents of indoor unit and outdoor unit.
If there is not air filter when the unit is running, the dust will be accumulated and may cause
the malfunction, ususally it is necessary to install the filter.
Check that the drainage pipe is bent or damaged.
To check the equipment is normal or correct installaed.
Pull out the plug, cut off the power supply.
Clean the filter and equipment, spare parts.
Start fan motor for 2-3 hours in order to clean, dry the equipmenbt internal.
