5HPRYDO3URFHGXUH
Procedure
Steps
a
b
10. Remove motor and motor support
11. Remove 4-way valve
motor
motor support
4-way valve
Twist off the tapping screws fixing
the motor, pull out the pin of leading
wire for motor and then remove the
motor.
Twist off the tapping screws fixing
the motor support, pull it upwards
and then remove the motor support.
Unsolder the pipeline between
compressor, condenser, gas and
liquid valve, and then remove the
4-way valve. (note: release all
refrigerant before unsoldering).