)XQFWLRQDQG&RQWURO
Press this button to start the unit operation. Press this button again to stop the unit operation.
ON/OFF :
MODE :
Each time you press this button,a mode is selected in a sequence that goes from AUTO, COOL, DRY, FAN,and
HEAT *, as the following:
AUTO
COOL
DRY
FAN
HAET
*
*Note:Only for models with heating function.
Press this button to decrease set temperature. Holding it down above 2 seconds rapidly decreases set temperature.
In AUTO mode, set temperature is not adjustable.
Press this button to increase set temperature.Holding it down above 2 seconds rapidly increases set temperature.
In AUTO mode, set temperature is not adjustable.
.
This button is used for setting fan speed in the sequence that goes from AUTO, , , to , then back to
Auto.
Auto
Low speed
Medium speed
High speed
:
Press button to start or stop up & down swing function.The remote controller defaults to simple swing condition.
Press + button and button at the same time at unit OFF to switch between simple swing and static swing,
blinking 2 seconds.
In static swing condition, press button, the swing angle of up & down louver changes as below:
After energization, AUTO mode is defaulted. In AUTO mode, the set temperature will not be displayed on the
LCD, and the unit will automatically select the suitable operation mode in accordance with the room temperature
to make indoor room comfortable.
If the unit is turned off during swing operation,the louver will stop at present position.
FAN
1
2
4
3
5
6
●
●
●
●
OFF
7
HEALTH SAVE:
Press HEALTH part of this button to turn on or off HEALTH function.
Pressing SAVE part of this button, is displayed and the unit goes into SAVE operation mode. Press SAVE
part of the button again to cancel SAVE function
.
During SAVE operation, the t
e
mperature and fan speed is not
adjustable.
Press button to start or stop left & right swing function.The remote controller defaults to simple swing
condition.
:
8
●
(not availalbe for this model)
