Service Manual
80
Installation and Maintenance
Procedure
Steps
Remove the nut fixing axial flow blade and then
remove the blade.
4. Remove axial flow blade
axial flow blade
nut
Remove the 2 screws connecting the motor
support and chassis, and then loosen the
stopper to remove the motor support.
motor support
chassis
stopper
5.Remove motor support sub-assy and motor
Remove the 6 screws fixing the motor and then
remove the motor.
screw
screw
motor
6. Remove electric box assy
electric box assy
Remove the screws fixing electric box assy ;
pull out each wiring terminal; lift the electric
box assy upwards to remove it.
Note:
When pulling out the wiring terminal, pay
attention to loose the clasp and dont pull it so
hard.
