47
Maintenance
Service Manual
Optional 2-2: Installation in a sliding
sash window
4. Close the window sash securely against the Window panel.
5. Stuff the sponge B between the glass and the window to
prevent air and insects from getting into the room.
6. Attach the bracket with a screw.
7. Connect joint B to joint C .
8. Rotate joint A and joint B+C into the two ends of heat
discharge pipe.
9. Insert joint A of heat discharge pipe (the side with
"TOP" is upwards) into the groove until you hear a sound.
10.Slide and open the exhaust cover on the window
panel, and attach the window adapter.
1. Attach the insect guard net to the window panel.
2. Cut the sponge A (adhesive type) to the proper length
and attach it to the window frame and to the side of sash.
3. Install the window panel into the window frame.
Make sure that the exhaust cover is attached to the window
panel.Inner height of the window:20.5"(520mm)
Use the window panel.
The window panel cannot be installed in windows less than
20.5" (520mm) high,
as you will be unable to shut the exhaust cover.
(1) Open the window sash and place the window panel on the
window frame.
(2) Secure the window panel to the window frame with screws.
Clockwise
Anti-clockwise
Joint A
Heat discharge pipe
Joint B+C
Groove
Clasp
The side with "TOP" is upwards
Joint C
Joint B
Sponge A
