46
Maintenance
Service Manual
Optional 1: Installation in a double window
Optional 2-1: Installation in a double-hung
sash window
1. Connect joint B to joint C .
Joint A
Joint C
Joint B
Joint B+C
Heat discharge pipe
4. Lead the exhaust hose outdoors.
Groove
Casp
The side with "TOP" is upwards
Joint A
Joint C
Joint B
Joint B+C
Heat discharge pipe
4. Lead the exhaust hose outdoors.
Groove
Casp
The side with "TOP" is upwards
Joint A
Joint C
Joint B
Joint B+C
Heat discharge pipe
4. Lead the exhaust hose outdoors.
Groove
Casp
The side with "TOP" is upwards
Joint A
Joint C
Joint B
Joint B+C
Heat discharge pipe
4. Lead the exhaust hose outdoors.
Groove
Casp
The side with "TOP" is upwards
2. Rotate joint A and joint B+C into the two ends of heat discharge pipe.
3. Insert joint A of heat discharge pipe (the side with "TOP" is upwards)
into the groove until you hear a sound.
4. Lead the exhaust hose outdoors.
1. Attach the insect guard net to the window panel.
2. Cut the sponge A (adhesive type) to the proper length and
attach it to the window stool and to the bottom of sash.
3. Attach the window panel to the window stool.
Make sure that the exhaust cover is attached to the window
panel.
Inner width of the window:20.5"(520mm)
Use the window panel.
The window panel cannot be installed in windows less than
20.5" (520mm) wide,
as you will be unable to shut the exhaust cover.
(1) Open the window sash and place the window panel on the
window sill.
(2) Secure the window panel to the window stool with screws.
Inner width of the window:20.5" (520mm)- 38.5" (980mm)
Use the window panel and the adjustment panel.
(1) Open the window sash and place the window panel on the
window sill.
(2) Slide the adjustment panel to fit the window frame width.
(3) Secure the window panel to the sill with screws.
Inner width of the window:38.5" (980mm) - 59" (1500mm)
Use the window panel, the adjustment panel and the extension
panel.
(1) Open the window sash and place the window panel on the
window sill.
(2) Slide the adjustment and extension panels to fit the window
frame width.
(3) Secure the window panel to the window sill with screws.
Sponge A
20.5"
Cut
Window panel
Exhaust cover
