Gree GMV-R series, Service Manual

Page: 107 / 188

104
Multi VRF Indoor
Unit Service Manual
Remove panel parts
Remark: Make sure the power supply is cut off before disassembling and protect all
the parts during disassembly. Do not scratch the outer parts.
Step Illustration Handling Instruction
Remove
panel parts
● Remove the screws shown by the
arrow in the graph with screwdriver
(two on both right and left and 4 in the
front) and then remove the panel parts.
Remove Sub-Assy of electric box
Remark: Make sure that the power supply is cut off before disassembling and protect all the parts
during disassembly, especially the components inside the box in case of water and hit.
Step Illustration Handling Instruction
1. Remove of
electric box cover
● Remove 3 screws as shown by
the arrow in the graph on left and
remove the electric box cover.
Remove air delecting plate modules
Remark: Make sure the power supply is cut off before disassembling and protect all the
parts during disassembly, especially the joints of the air delecting plate.
Step Illustration Handling Instruction
Remove Sub-
Assy of air
delecting plate
● Remove the air delecting plates
from the air delecting plate support
assembly, and then remove both
ends from the air sweeping motor.
joint (As is shown in the graph, arrow
represents the support assembly and
circle the air sweeping motor joint.)