background image

Preface

Gree DC Inverter Multi VRF System, with the most advanced technologies in the world, uses eco-

friendly refrigerant R410A as its cooling medium. For correct installation and operation, please read 
this manual carefully. Before reading the manual, please note that:

(1) For safety operation, please strictly follow the instructions in this manual.
(2) During operation, the gross rated capacity of working IDU should be within the gross rated 

capacity of ODU. Otherwise, IDU’s cooling/heating performance will be reduced.

(3) This manual must be in the hands of direct operators or maintenance men.
(4) In case of malfunction and operation failure, please examine the following items and contact 

our authorized service centers as soon as possible.

1) Nameplate (model, cooling capacity, product code, ex-factory date).
2) Malfunction status (detail description of conditions before and after malfunction occurs)

(6) All units have been strictly tested and proved to be qualified before ex-factory. To avoid unit 

damage or even operation failure which may be caused by improper disassembly, please do 
not disassemble units by yourself. If disassembly is needed, please contact our authorized 
serve centers for help.

(7) All graphics and information in this manual are only for reference. Manufacturer reserves the 

right for changes in terms of sales or production at any time and without prior notice.

This appliance can be used by children aged from 8 years and above and persons with reduced 

physical, sensory or mental capabilities or lack of experience and knowledge if they have been given 
supervision or instruction concerning use of the appliance in a safe way and understand the hazards 
involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be 
made by children without supervision.

DISPOSAL:Donot dispose this product as unsorted municipal waste. Collection of such waste 

separately for special treatment is necessary.

Summary of Contents for GMV-1010WM/B-X





























































Reviews: