Gree GFH60K3HI, Service Manual

Page: 15 / 141

U-Match Series Service Manual
12
3.3.2 Indoor unit
Table 1-4-2 Electrical Data of Indoor Unit
Model
Power
Supply
Fan Motor
FLA
Fuse/Breaker
Capacity
Min. Power
Supply Cord
V/Ph/Hz A A mm
2
GFH18K3HI 220-240,1,50 <1 5/6 1.0
GFH18K3H1I 220-240,1,50 <1 5/6 1.0
GFH24K3HI 220-240,1,50
<1
5/6 1.0
GFH24K3H1I 220-240,1,50 <1 5/6 1.0
GFH30K3HI 220-240,1,50 <1 5/6 1.0
GFH30K3H1I 220-240,1,50
<1
5/6 1.0
GFH36K3HI 220-240,1,50 <1 5/6 1.0
GFH36K3H1I 220-240,1,50 <1 5/6 1.0
GFH42K3HI 220-240,1,50
<1
5/6 1.0
GFH42K3H1I 220-240,1,50 <1 5/6 1.0
GFH48K3HI 220-240,1,50 <1 5/6 1.0
GFH48K3H1I 220-240,1,50 <1 5/6 1.0
GFH60K3HI 220-240,1,50 <1 5/6 1.0
GFH60K3H1I 220-240,1,50 <1 5/6 1.0
GKH18K3HI 220-240,1,50
<1
5/6 1.0
GKH24K3HI 220-240,1,50 <1 5/6 1.0
GKH30K3HI 220-240,1,50 <1 5/6 1.0
GKH36K3HI 220-240,1,50
<1
5/6 1.0
GKH42K3HI 220-240,1,50 <1 5/6 1.0
GKH48K3HI 220-240,1,50 <1 5/6 1.0
GKH60K3HI 220-240,1,50 <1 5/6 1.0
Notes:
RLA: Rated load amperes
LRA: Locked rotor amperes
FLA: Full load current
①
Install the disconnect device with a contact gap of at least 3mm in all poles nearby the units
(Both indoor unit and outdoor unit).The appliance must be positioned so that the plug is
accessible.
②
The specifications of the breaker and power cable listed in the table above are determined based
on the maximum power (maximum amps) of the unit.
③
The specifications of the power cable listed in the table above are applied to the conduit-guarded
multi-wire copper cable (like, YJV copper cable, consisting of PE insulated wires and a PVC
cable jacket) used at 40°С and resistible to 90°С (see IEC 60364-5-52). If the working condition
changes, they should be modified according to the related national standard.
④
The specifications of the breaker listed in the table above are applied to the breaker with the
working temperature at 40°С. If the working condition changes, they should be modified
according to the related national standard.