To edit objects using the PSR-800, follow the instructions above
for Browsing Scanlists and Objects to select the object you wish
to edit, then press the
MENU
key to activate the Object Menu.
Alternatively, you may press the
MENU
key when the PSR-800
stops on an active object while scanning to edit that object.
To change an option use the
and
keys to scroll to the
option you wish to change, then press the
key to toggle values
or proceed to the next step.
The following options are available in the Object Menu:
Store SQ code
Only appears when the
MENU
key is pressed while monitoring a
conventional channel that is set for CTCSS or DCS search
mode. Selecting “Store SQ code” stores the value of the found
CTCSS or DCS code into the record for the conventional
channel, and subsequent transmissions must have a matching
CTCSS or DCS squelch code value to be monitored by the
PSR-800.
Main Menu
Navigates to the PSR-800
ʼ
s Main Menu
Cancel Changes
Exits the Object Menu without saving any changes
Save Changes
Saves your changes and exits the Object Menu
Alpha Tag
Allows you to change the name of the selected object. Follow the
on-screen instructions and use the
keys to change
the object name.
Set Scanlists
Allows you to change the Scanlists that the selected object is a
member of. Use the
▶
/II/SEL
key to change Scanlist membership
by adding or removing checkmarks to Scanlists.
Locked Out
When checked, the selected object is Locked Out and will not be
scanned. Locked Out status is not changed when the Main
Menu
ʼ
s Restore Skipped utility is used. Use the
▶
/II/SEL
key to
toggle Locked Out status. Lockout status is indicated in the
PSR-800 User Manual
!
Page 63
