Getting Started
Unpacking the PSR-800
Unpack your PSR-800 carefully. Your PSR-800 is supplied with
the following items:
•
PSR-800 Main Unit
•
2GB MicroSD Card
•
Rubber antenna
•
Rotatable belt clip
•
USB cable
•
CD containing Owner
ʼ
s Manual, PC software and Database
Save all documentation and packing materials in case it is
necessary to return your scanner for repair.
WARNING:
!
Always protect the PSR-800 from exposure to extreme heat
!
or cold temperatures.
WARNING:
!
The PSR-800 is not waterproof. Do not expose it to rain,
!
excessive humidity or moisture.
Inserting the batteries
Remove the door covering the battery compartment by pressing
gently where the door is marked
OPEN
and sliding the door
downwards until it stops, approximately 1/4”. Lift the door away
from the radio.
Set the battery type selector switch to ALK for non-rechargeable
alkaline batteries or NiMH for rechargeable NiMH batteries.
Insert four size AA batteries, taking care to ensure that the
batteries are inserted according to the polarity diagram shown
inside of the battery compartment. Replace the battery
compartment door by placing it back over the batteries and
sliding it upward gently until it locks in place.
WARNING:
!
Never operate the PSR-800 with alkaline batteries if the
!
Battery Type Selection switch is set to the NiMH position.
!
Intentionally or accidentally recharging non-rechargeable
!
batteries will cause them to overheat, leak or explode. Dispose
!
of alkaline batteries promptly and properly. Do not burn or bury
!
them. Dispose of rechargeable batteries properly by taking
!
them to an approved battery recycling facility. Many
PSR-800 User Manual
!
Page 25
