GRECH MOTORS
53
cause steering, suspension, axle, transfer case or
power transfer unit failure. If you have questions
regarding tire replacement, contact your authorized
dealer as soon as possible.
To reduce the risk of serious injury, when mounting
replacement tires and wheels, you should not
exceed the maximum pressure indicated on the
sidewall of the tire to set the beads without additional
precautions listed below. If the beads do not seat at
the maximum pressure indicated, re-lubricate and try
again.
WARNINGS
When inflating the tire for mounting
pressures up to 20 psi (1.38 bar) greater
than the maximum pressure on the tire
sidewall, the following precautions must
be taken to protect the person mounting the tire:
1. Make sure that you have the correct tire and wheel
size.
2. Lubricate the tire bead and wheel bead seat area
again.
3. Stand at a minimum of 12 feet (3.6 meters) away
from the wheel and tire assembly.
4. Use both eye and ear protection.
For a mounting pressure more than 20 psi (1.38 bar)
greater than the maximum pressure, a Grech Motors
dealer or other tire service professional should do the
mounting.
Always inflate steel carcass tires with a remote air
fill with the person inflating standing at a minimum
of 12 feet (3.6 meters) away from the wheel and tire
assembly
Important:
Remember to replace
the wheel valve stems when the road
tires are replaced on your vehicle The
two front tires or two rear tires should
generally be replaced as a pair.
Wheels and Tires
