GRECH MOTORS
26
Lavatory Operation (if equipped)
Dumping the Lavatory
Use the following steps to dump the lavatory on the bus. You should always wear rubber gloves and a face guard (or glasses/goggles) when
dumping the lavatory.
Step 1
Remove the sewer
hose from the storage
compartment.
Step 2
Place the end of the hose in an
approved sewer drain. Then,
hook the hose to the dump valve
which is located under the bus
behind the right drive tire. Now it
is OK to open the valve.
Step 3
Step on the toilet flush and allow the
water to run to flush the tank.
Step 4
Close the valve, rinse the hose and return it to the storage compartment.
You should also refill the fresh water tank as outlined in the Filling the
Water Tank section.
Note:
The sewage tank hose
must be drained into an
approved sewer drain only.
Never empty on the ground.
