49
Experience the Internet @ GreatSpeed
GS-R250S Installation Guide
Bridge Commands
• device add
>device add <device>
!
This command adds a device to the bridge configuration.
< device >: The list below shows devices which may be attached to the bridge , although not all systems may
support all devices.
lec1 - Forum LAN emulation
edd - Ethernet driver
rfc1483 - RFC1483 protocol (PVC)
ppp - Point-to Point protocol
Configuration saving saves this information.
Example:
Mymachine > bridge device add edd
!
Mymachine> bridge device add //bun/port=adsl/rfc1483=true/mode=llcbridged/txvpi=0/
txvci=35/rxvpi=0/rxvci=35
!
Mymachine > bridge add ppp/DEVICE=1
!
• device delete
>device delete <device>
!
This command deletes a device from the bridge configuration. The changes will only take place after the
configuration is saved and the system is rebooted.
Example:
Mymachine > bridge device delete //bun/port=adsl/rfc1483=true/mode=llcbridged/txvpi=0/
txvci=35/rxvci=0/rxvci=35
!
Mymachine bridge > device delete edd
!
• device list
>device list
!
This command lists all the devices that are currently attached to the bridge.
Example:
Mymachine > bridge device list
!
Mymachine bridge > device list
!
•
status
>status
!
This command shows the status of the bridge and its ports.
Example:
Mymachine> bridge status
!
