manualshive.com logo in svg

GreatSpeed GS-R250S Plus/Duo, Installation Manual & Command Reference

Share
Download
GreatSpeed GS-R250S Plus/Duo Installation Manual & Command Reference Download Page 24

24

GS-R250S Installation Guide

Experience the Internet @ GreatSpeed

Routed Ethernet over ATM (RFC1483) Setup

You will be assigning the router an IP address here. The IP address and PVC settings will be provided by your
ADSL service provider. Since the modem is routing, an IP address needs to be assigned on both of the modem’s
interfaces. Also, the default gateway of each PC on your network must be set to the IP address of the modem’s
ethernet port.

PCs

subnet 1 : 192.168.4.0

        netmask : 255.255.255.0

           DSLAM &Access Concentrator

       192.168.4.1 ~

    subnet2 :192.168.1.0

       192.168.4.99

          192.168.1.1

gateway: 192.168.4.254

  ADSL Router

    Ethernet:

       RFC1483 :

               192.168.4.254

  192.168.1.254

                      PVC 0/35

1

The “ADSL ROUTER Configuration Utility” window will now ask you to enter your IP settings.
Enter your Ethernet IP address, ADSL IP address and NET MASK address. You also have option to
enable or disable NAT functionality. Then click 

Next

.

Summary of Contents for GS-R250S Plus/Duo































































Reviews:

No comments

Brands by name

Popular brands

Load more brands