43
Experience the Internet @ GreatSpeed
GS-R250S Installation Guide
Console Command Reference
The main prompt in your router is the routers MAC address. So, the prompt may read something such as
“00:20:2B:00:04:9F >”. Once you have specified an IP address, the prompt will then always use the IP address
instead of the MAC address, such as “192.168.4.254 >”. Since both of these numbers will vary and may be
dynamic, we will refer to the prompt as “Mymachine >” henceforth.
You may combine directory instructions in with commands. For instance, see the example below. “IP” is a
directory and you would like to run the command “config”. In example A, from the main prompt “Mymachine”,
you may either type
ip
and hit enter, and then type
config
and hit enter. Or, you may combine the two into the
same line as in example B, from the main prompt “Mymachine”, you can type
ip config
and hit enter. Either
will do the same thing.
A.
Mymachine > ip
Mymachine ip > config
B.
Mymachine > ip config
Directory of Commands:
System Commands
Page 44
IP Commands
Page 45
Bridge Commands
Page 49
PPP Commands
Page 50
BSP Commands
Page 54
DHCP Server Commands
Page 56
