13
Experience the Internet @ GreatSpeed
GS-R250S Installation Guide
TCP/IP Configuration
To connect to the Internet or configure the Router via Ethernet, the TCP/IP protocol must be installed and
configured correctly. Follow the steps below to determine if you have TCP/IP installed and configured correctly
for Windows 95/98.
Step 1 - Check if TCP/IP is installed
To check if TCP/IP is properly installed, use the
following steps
Double-click on
My Computer
, then
Control
Panel
, and then double-click the
Network
icon.
1
2
In the “Network” window, check that TCP/IP is installed
and setup for the Ethernet NIC that is installed in your
computer (for example, TCP/IP->Intel 21140 based 10/
100mbps Ethernet Controller).
If TCP/IP has been properly installed, proceed to the
TCP/IP configuration on page 15. If TCP/IP has not
been properly installed for your NIC, proceed to the
next page.
3
