GREAT PLAINS Ultra-Till I 3030 Series, Operator'S Manual

Page: 14 / 36

Great Plains | 576-026M-A | 05/11/2021 Table of Contents Index 12
UT3030-UT5052 Table of Contents Index Introduction
Introduction
Great Plains welcomes you to our growing family of new
product owners. The Series I Ultra-Till UT3030-UT5052 have
been designed with care and built by skilled workers using
quality materials. Proper setup, maintenance, and safe
operating practices will help you get years of satisfactory use
from the machine.
Models Covered
Description of Unit
The Series I Ultra-Till UT3030-UT5052 is a three or five-
section seedbed preparation tillage tool. Working width ranges
from 30 to 52 feet. The implement is designed to combine
discing/slicing, with shallow harrowing in a vertical tillage
field operation to smooth, level and incorporate chemicals in a
single pre-plant pass.
Document Family
Using This Manual
This manual will familiarize you with
safety, assembly, operation,
adjustments, troubleshooting, and
maintenance. Read this manual and
follow the recommendations to help
ensure safe and efficient operation.
The information in this manual is current at printing. Some
parts may change to assure top performance.
Definitions
The following terms are used throughout this manual.
A crucial point of information related to the preceding topic.
Read and follow the directions to remain safe, avoid serious
damage to equipment and ensure desired field results.

Useful information related to the preceding topic.
Right-hand and left-hand as used in this manual
are determined by facing the direction the
machine will travel while in use unless
otherwise stated. An orientation rose in some
line art illustrations shows the directions of: Up,
Back, Left, Down, Front, Right.
UT3030 30-Foot 3-section
UT5036 36-Foot 5-section
UT5042 42-Foot 5-section
UT5052 52-Foot 5-section
L
R
U
D
F
B
L
R
Figure 1
UT3030 Ultra-Till
43183
576-026Q Pre-Delivery Manual
576-026M-A Operator Manual (this document)
576-026P Parts Manual
U
D
F
B
L
R