08/01/2018
500-641M
TSF1080, TSF1090, TSF1280 & TSF1290
Operations
48
Inducting Chemicals (Option)
Always turn pump on before opening inductor shutoff valve (at
step 14). Always turn pump off after closing inductor shutoff
valve (at step 19). If the pump is not running, the tank can
drain back through the inductor. The inductor lid is vented,
and cannot prevent overflow.
9.
Check that the
inductor-outlet/tank-inlet valve is
open.
Refer to Figure 36 and Figure 37
10. At the inductor, set valves:
inductor valve (5) to OFF and
product valve (4) from OFF to INDUCT.
11. At the valve panel, set valves:
(1) to AGITATE,
(2) to MAIN TANK, and
(3) to SPRAY.
12. Be sure the valve to the tank is open. Start the pump.
NOTE:
The pump recirculates tank contents through a
venturi beneath the inductor tank.
13. Open the inductor lid.
NOTE:
The inductor lid is vented, and the inductor may be
operated with the lid on or off.
14. Open the inductor shutoff valve (5) and inspect to
ensure that there is no back-flow of water from the
tank into the inductor.
15. Add the chemical to the inductor tank.
16. When the required amount of chemical has been
added, and the inductor tank is empty, close the
inductor shutoff valve (5).
17. Secure the lid on the inductor tank.
18. Turn off the pump.
19. Set the product valve (4) to OFF.
Figure 36
Panel for Induction
27275
3
2
1
Figure 37
Inductor Valves On
14993
5
4
