GREAT PLAINS SPARTAN II, Operator'S Manual, Page: 91 / 131

Great Plains | 166-486M | 2020/10/08 84
Spartan
II
607 Table of Contents Index Maintenance
Coulter Grease Bank
Coulter Hub BearingsParking Brake
Cart Wheel Bearings
Clean and pack bearings with bearing grease.
Implement Wheel Bearings
Clean and pack bearings with bearing grease.
These hubs also have a grease fitting. If
grease is added using the grease fitting,
pump gently and only until resistance is
felt. Excess pressure or grease volume can
damage seals.
Brake Actuating Shaft

Storage
Store the drill where children do not play. If possible,
store inside for longer life.
1. Follow the steps in “
Parking ”, except for step 6.
2. Unload all material in hoppers.
3. Raise, fold and lock the implement.
If storing the implement unfolded:
a. Raise and unfold the implement.
b. Install the gauge wheel lock channels.
c. Initiate a fold just until the center lock
engages.
d. Lower the implement onto the lock channels.
e. Set all hydraulic remotes to float.
4. Unlatch the hopper lids so the seals are not in
compression during storage.
Route a chain or security cable through the
hold-down u-bolt and the latch handle to prevent
unauthorized entry, and prevent high winds from
38234
10
13879
100
38224
Seasonal
31115
Seasonal
31266
Seasonal
i
38281
Seasonal