GREAT PLAINS PL5700, Operator'S Manual

Page: 76 / 150

Great Plains | 411-681M | 04/08/2021 69
PL5700 Planter Table of Contents Index Maintenance
4. Reinstall the cartridge, canister, and turn on the
ball valve.
End of Season Filter Cleaning
1. Load 10 to 15 gallons (40 to 60 liters) of clean
water in the tank.
2. Pump most of the water through the system. If
doing this by hand-turning the ground drive
wheel, first install the largest drop-line orifice size
and set the pump adjuster to maximum to increase
flow.
3. With the valves open, remove the filter canister.
4. Clean the strainer and canister.
5. Fully drain the tanks and lines.
6. Reinstall the strainer and canister.
7. Add 2 pt (1 liter) of RV antifreeze to each tank.
8. Pump until the tank is just empty. Some fluid will
remain in strainer.
9. Open the supply line above the pump inlet. Add
RV antifreeze and operate the pump until it is
filled.

Lubrication
If any movable parts such as levers, pivots, and
clamps are not moving smoothly due to rust or
hindering material, do not attempt to force parts into
motion. Instead, remove the rust or unwanted material
and apply oil or grease on the relevant spot. Otherwise,
machine may become damaged through impaired
usage.
Grease Fittings
Lubricate with grease at the hourly interval indicated
in the arrow. If you operate the machine in extremely
wet and/or muddy conditions, lubricate grease
fittings more frequently.
Two-Point Hitch Pivot
Grease one grease fitting under the two-point hitch.
Apply until grease emerges.
Two-Point Hitch to Tongue Pivot
Grease one grease fitting at the tongue pivot. Apply
until grease emerges.
Side Depth Wheel Bushing
Grease only the top two grease fittings on each side
of each row unit. Apply until grease emerges.
Chain Drive Wing Transfer Driveline
Grease two grease fittings each side. Apply until
grease emerges on the joints.
Bearings
Wheel Bearings
Repack two bearings on each wheel.
TP-71156
8
TP-71113
8
68169
8
TP-71158
50
TP-71157
Seasonal